Valve Positioning Systems

Overview

Positional control or proportional valve positioning systems are available using either a pneumatic impulse signal (e.g. 0.2 to 1 Barg) or an electrical signal (normally 4 to 20 mA). These systems are designed either to have customer defined pre-set positions or to have full control of the valve between the open and closed positions. Valve positioning systems can be used in conjunction with on/off production or ESD controls and can be utilised for a partial test system e.g. using digital controllers. PLC controllers can also be incorporated to provide complete automatic valve positioning control via input from pressure transmitters.

Applications

Precise positioning of quarter-turn and linear valves.

Operating Ranges

Electrical Supply (VAC)

380/440V – 3 Phase – 50/60 Cycles

110/240V – Single Phase 50/60 Cycles

Electrical Supply (VDC)

24VDC 50W or 100W

Communications

Command signal: 4-20mA

Re-transmission Signal: 4-20mA

Protocol: 4-20mA HART or Foundation Fieldbus

Accuracy

Positional: Better than ±0.5%

Repeatability: Better than ±0.5%

Temperatures

Low: -60 to +60°C  (-76 to +140°F)

Standard: -20 to +60°C  (-4 to +140°F)

Key Features & Benefits

The same simplicity and low cost of installation as provided by electric actuators

Fail safe or fail last operation

The power, precision and compact size of high pressure hydraulic systems

Industry-leading  control options  and system diagnostics

Zero emissions

Environmentally responsible via low power, solar powered and biodegradable fluid options